diff --git a/Makefile b/Makefile
index 4d0711f54047..94ce690ab6e8 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 6
-SUBLEVEL = 0
-EXTRAVERSION =
+SUBLEVEL = 1
+EXTRAVERSION = -rc1
 NAME = Kleptomaniac Octopus
 
 # *DOCUMENTATION*
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 11ea1aff40db..8c6f8c83dd6f 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -401,6 +401,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0xa252), board_ahci }, /* Lewisburg RAID*/
 	{ PCI_VDEVICE(INTEL, 0xa256), board_ahci }, /* Lewisburg RAID*/
 	{ PCI_VDEVICE(INTEL, 0xa356), board_ahci }, /* Cannon Lake PCH-H RAID */
+	{ PCI_VDEVICE(INTEL, 0x06d7), board_ahci }, /* Comet Lake-H RAID */
 	{ PCI_VDEVICE(INTEL, 0x0f22), board_ahci_mobile }, /* Bay Trail AHCI */
 	{ PCI_VDEVICE(INTEL, 0x0f23), board_ahci_mobile }, /* Bay Trail AHCI */
 	{ PCI_VDEVICE(INTEL, 0x22a3), board_ahci_mobile }, /* Cherry Tr. AHCI */
diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c
index 039963a7765b..198ddfb8d2b1 100644
--- a/drivers/media/usb/b2c2/flexcop-usb.c
+++ b/drivers/media/usb/b2c2/flexcop-usb.c
@@ -511,6 +511,9 @@ static int flexcop_usb_init(struct flexcop_usb *fc_usb)
 		return ret;
 	}
 
+	if (fc_usb->uintf->cur_altsetting->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	switch (fc_usb->udev->speed) {
 	case USB_SPEED_LOW:
 		err("cannot handle USB speed because it is too slow.");
@@ -544,9 +547,6 @@ static int flexcop_usb_probe(struct usb_interface *intf,
 	struct flexcop_device *fc = NULL;
 	int ret;
 
-	if (intf->cur_altsetting->desc.bNumEndpoints < 1)
-		return -ENODEV;
-
 	if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) {
 		err("out of memory\n");
 		return -ENOMEM;
diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c
index e53c58ab6488..ef62dd6c5ae4 100644
--- a/drivers/media/usb/dvb-usb/dib0700_core.c
+++ b/drivers/media/usb/dvb-usb/dib0700_core.c
@@ -818,7 +818,7 @@ int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf)
 
 	/* Starting in firmware 1.20, the RC info is provided on a bulk pipe */
 
-	if (intf->altsetting[0].desc.bNumEndpoints < rc_ep + 1)
+	if (intf->cur_altsetting->desc.bNumEndpoints < rc_ep + 1)
 		return -ENODEV;
 
 	purb = usb_alloc_urb(0, GFP_KERNEL);
@@ -838,7 +838,7 @@ int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf)
 	 * Some devices like the Hauppauge NovaTD model 52009 use an interrupt
 	 * endpoint, while others use a bulk one.
 	 */
-	e = &intf->altsetting[0].endpoint[rc_ep].desc;
+	e = &intf->cur_altsetting->endpoint[rc_ep].desc;
 	if (usb_endpoint_dir_in(e)) {
 		if (usb_endpoint_xfer_bulk(e)) {
 			pipe = usb_rcvbulkpipe(d->udev, rc_ep);
diff --git a/drivers/media/usb/gspca/ov519.c b/drivers/media/usb/gspca/ov519.c
index f417dfc0b872..0afe70a3f9a2 100644
--- a/drivers/media/usb/gspca/ov519.c
+++ b/drivers/media/usb/gspca/ov519.c
@@ -3477,6 +3477,11 @@ static void ov511_mode_init_regs(struct sd *sd)
 		return;
 	}
 
+	if (alt->desc.bNumEndpoints < 1) {
+		sd->gspca_dev.usb_err = -ENODEV;
+		return;
+	}
+
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
 	reg_w(sd, R51x_FIFO_PSIZE, packet_size >> 5);
 
@@ -3603,6 +3608,11 @@ static void ov518_mode_init_regs(struct sd *sd)
 		return;
 	}
 
+	if (alt->desc.bNumEndpoints < 1) {
+		sd->gspca_dev.usb_err = -ENODEV;
+		return;
+	}
+
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
 	ov518_reg_w32(sd, R51x_FIFO_PSIZE, packet_size & ~7, 2);
 
diff --git a/drivers/media/usb/gspca/stv06xx/stv06xx.c b/drivers/media/usb/gspca/stv06xx/stv06xx.c
index 79653d409951..95673fc0a99c 100644
--- a/drivers/media/usb/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/usb/gspca/stv06xx/stv06xx.c
@@ -282,6 +282,9 @@ static int stv06xx_start(struct gspca_dev *gspca_dev)
 		return -EIO;
 	}
 
+	if (alt->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
 	err = stv06xx_write_bridge(sd, STV_ISO_SIZE_L, packet_size);
 	if (err < 0)
@@ -306,11 +309,21 @@ static int stv06xx_start(struct gspca_dev *gspca_dev)
 
 static int stv06xx_isoc_init(struct gspca_dev *gspca_dev)
 {
+	struct usb_interface_cache *intfc;
 	struct usb_host_interface *alt;
 	struct sd *sd = (struct sd *) gspca_dev;
 
+	intfc = gspca_dev->dev->actconfig->intf_cache[0];
+
+	if (intfc->num_altsetting < 2)
+		return -ENODEV;
+
+	alt = &intfc->altsetting[1];
+
+	if (alt->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	/* Start isoc bandwidth "negotiation" at max isoc bandwidth */
-	alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
 	alt->endpoint[0].desc.wMaxPacketSize =
 		cpu_to_le16(sd->sensor->max_packet_size[gspca_dev->curr_mode]);
 
@@ -323,6 +336,10 @@ static int stv06xx_isoc_nego(struct gspca_dev *gspca_dev)
 	struct usb_host_interface *alt;
 	struct sd *sd = (struct sd *) gspca_dev;
 
+	/*
+	 * Existence of altsetting and endpoint was verified in
+	 * stv06xx_isoc_init()
+	 */
 	alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
 	min_packet_size = sd->sensor->min_packet_size[gspca_dev->curr_mode];
diff --git a/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c b/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c
index 6d1007715ff7..ae382b3b5f7f 100644
--- a/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c
+++ b/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c
@@ -185,6 +185,10 @@ static int pb0100_start(struct sd *sd)
 	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
 	if (!alt)
 		return -ENODEV;
+
+	if (alt->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
 
 	/* If we don't have enough bandwidth use a lower framerate */
diff --git a/drivers/media/usb/gspca/xirlink_cit.c b/drivers/media/usb/gspca/xirlink_cit.c
index 934a90bd78c2..c579b100f066 100644
--- a/drivers/media/usb/gspca/xirlink_cit.c
+++ b/drivers/media/usb/gspca/xirlink_cit.c
@@ -1442,6 +1442,9 @@ static int cit_get_packet_size(struct gspca_dev *gspca_dev)
 		return -EIO;
 	}
 
+	if (alt->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	return le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
 }
 
@@ -2626,6 +2629,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 static int sd_isoc_init(struct gspca_dev *gspca_dev)
 {
+	struct usb_interface_cache *intfc;
 	struct usb_host_interface *alt;
 	int max_packet_size;
 
@@ -2641,8 +2645,17 @@ static int sd_isoc_init(struct gspca_dev *gspca_dev)
 		break;
 	}
 
+	intfc = gspca_dev->dev->actconfig->intf_cache[0];
+
+	if (intfc->num_altsetting < 2)
+		return -ENODEV;
+
+	alt = &intfc->altsetting[1];
+
+	if (alt->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	/* Start isoc bandwidth "negotiation" at max isoc bandwidth */
-	alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
 	alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(max_packet_size);
 
 	return 0;
@@ -2665,6 +2678,9 @@ static int sd_isoc_nego(struct gspca_dev *gspca_dev)
 		break;
 	}
 
+	/*
+	 * Existence of altsetting and endpoint was verified in sd_isoc_init()
+	 */
 	alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
 	if (packet_size <= min_packet_size)
diff --git a/drivers/media/usb/usbtv/usbtv-core.c b/drivers/media/usb/usbtv/usbtv-core.c
index 5095c380b2c1..ee9c656d121f 100644
--- a/drivers/media/usb/usbtv/usbtv-core.c
+++ b/drivers/media/usb/usbtv/usbtv-core.c
@@ -56,7 +56,7 @@ int usbtv_set_regs(struct usbtv *usbtv, const u16 regs[][2], int size)
 
 		ret = usb_control_msg(usbtv->udev, pipe, USBTV_REQUEST_REG,
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			value, index, NULL, 0, 0);
+			value, index, NULL, 0, USB_CTRL_GET_TIMEOUT);
 		if (ret < 0)
 			return ret;
 	}
diff --git a/drivers/media/usb/usbtv/usbtv-video.c b/drivers/media/usb/usbtv/usbtv-video.c
index 3d9284a09ee5..b249f037900c 100644
--- a/drivers/media/usb/usbtv/usbtv-video.c
+++ b/drivers/media/usb/usbtv/usbtv-video.c
@@ -800,7 +800,8 @@ static int usbtv_s_ctrl(struct v4l2_ctrl *ctrl)
 		ret = usb_control_msg(usbtv->udev,
 			usb_rcvctrlpipe(usbtv->udev, 0), USBTV_CONTROL_REG,
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			0, USBTV_BASE + 0x0244, (void *)data, 3, 0);
+			0, USBTV_BASE + 0x0244, (void *)data, 3,
+			USB_CTRL_GET_TIMEOUT);
 		if (ret < 0)
 			goto error;
 	}
@@ -851,7 +852,7 @@ static int usbtv_s_ctrl(struct v4l2_ctrl *ctrl)
 	ret = usb_control_msg(usbtv->udev, usb_sndctrlpipe(usbtv->udev, 0),
 			USBTV_CONTROL_REG,
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			0, index, (void *)data, size, 0);
+			0, index, (void *)data, size, USB_CTRL_SET_TIMEOUT);
 
 error:
 	if (ret < 0)
diff --git a/drivers/media/v4l2-core/v4l2-device.c b/drivers/media/v4l2-core/v4l2-device.c
index 63d6b147b21e..41da73ce2e98 100644
--- a/drivers/media/v4l2-core/v4l2-device.c
+++ b/drivers/media/v4l2-core/v4l2-device.c
@@ -179,6 +179,7 @@ static void v4l2_subdev_release(struct v4l2_subdev *sd)
 
 	if (sd->internal_ops && sd->internal_ops->release)
 		sd->internal_ops->release(sd);
+	sd->devnode = NULL;
 	module_put(owner);
 }
 
diff --git a/drivers/staging/kpc2000/kpc2000/core.c b/drivers/staging/kpc2000/kpc2000/core.c
index 93cf28febdf6..7b00d7069e21 100644
--- a/drivers/staging/kpc2000/kpc2000/core.c
+++ b/drivers/staging/kpc2000/kpc2000/core.c
@@ -110,10 +110,10 @@ static ssize_t cpld_reconfigure(struct device *dev,
 				const char *buf, size_t count)
 {
 	struct kp2000_device *pcard = dev_get_drvdata(dev);
-	long wr_val;
+	unsigned long wr_val;
 	int rv;
 
-	rv = kstrtol(buf, 0, &wr_val);
+	rv = kstrtoul(buf, 0, &wr_val);
 	if (rv < 0)
 		return rv;
 	if (wr_val > 7)
diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
index 845c8817281c..f7f09c0d273f 100644
--- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c
+++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
@@ -32,6 +32,7 @@ static const struct usb_device_id rtw_usb_id_tbl[] = {
 	/****** 8188EUS ********/
 	{USB_DEVICE(0x056e, 0x4008)}, /* Elecom WDC-150SU2M */
 	{USB_DEVICE(0x07b8, 0x8179)}, /* Abocom - Abocom */
+	{USB_DEVICE(0x0B05, 0x18F0)}, /* ASUS USB-N10 Nano B1 */
 	{USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */
 	{USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */
 	{USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */
diff --git a/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt b/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt
index 081d58abd5ac..fca6357e1d45 100644
--- a/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt
+++ b/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt
@@ -6,7 +6,7 @@ SPI
 You have to declare the WFxxx chip in your device tree.
 
 Required properties:
- - compatible: Should be "silabs,wfx-spi"
+ - compatible: Should be "silabs,wf200"
  - reg: Chip select address of device
  - spi-max-frequency: Maximum SPI clocking speed of device in Hz
  - interrupts-extended: Should contain interrupt line (interrupt-parent +
@@ -15,6 +15,7 @@ Required properties:
 Optional properties:
  - reset-gpios: phandle of gpio that will be used to reset chip during probe.
    Without this property, you may encounter issues with warm boot.
+   (Legacy: when compatible == "silabs,wfx-spi", the gpio is inverted.)
 
 Please consult Documentation/devicetree/bindings/spi/spi-bus.txt for optional
 SPI connection related properties,
@@ -23,12 +24,12 @@ Example:
 
 &spi1 {
 	wfx {
-		compatible = "silabs,wfx-spi";
+		compatible = "silabs,wf200";
 		pinctrl-names = "default";
 		pinctrl-0 = <&wfx_irq &wfx_gpios>;
 		interrupts-extended = <&gpio 16 IRQ_TYPE_EDGE_RISING>;
 		wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
 		reg = <0>;
 		spi-max-frequency = <42000000>;
 	};
diff --git a/drivers/staging/wfx/bus_sdio.c b/drivers/staging/wfx/bus_sdio.c
index f8901164c206..5450bd5e1b5d 100644
--- a/drivers/staging/wfx/bus_sdio.c
+++ b/drivers/staging/wfx/bus_sdio.c
@@ -200,25 +200,23 @@ static int wfx_sdio_probe(struct sdio_func *func,
 	if (ret)
 		goto err0;
 
-	ret = wfx_sdio_irq_subscribe(bus);
-	if (ret)
-		goto err1;
-
 	bus->core = wfx_init_common(&func->dev, &wfx_sdio_pdata,
 				    &wfx_sdio_hwbus_ops, bus);
 	if (!bus->core) {
 		ret = -EIO;
-		goto err2;
+		goto err1;
 	}
 
+	ret = wfx_sdio_irq_subscribe(bus);
+	if (ret)
+		goto err1;
+
 	ret = wfx_probe(bus->core);
 	if (ret)
-		goto err3;
+		goto err2;
 
 	return 0;
 
-err3:
-	wfx_free_common(bus->core);
 err2:
 	wfx_sdio_irq_unsubscribe(bus);
 err1:
@@ -234,7 +232,6 @@ static void wfx_sdio_remove(struct sdio_func *func)
 	struct wfx_sdio_priv *bus = sdio_get_drvdata(func);
 
 	wfx_release(bus->core);
-	wfx_free_common(bus->core);
 	wfx_sdio_irq_unsubscribe(bus);
 	sdio_claim_host(func);
 	sdio_disable_func(func);
diff --git a/drivers/staging/wfx/bus_spi.c b/drivers/staging/wfx/bus_spi.c
index 40bc33035de2..d6a75bd61595 100644
--- a/drivers/staging/wfx/bus_spi.c
+++ b/drivers/staging/wfx/bus_spi.c
@@ -27,6 +27,8 @@ MODULE_PARM_DESC(gpio_reset, "gpio number for reset. -1 for none.");
 #define SET_WRITE 0x7FFF        /* usage: and operation */
 #define SET_READ 0x8000         /* usage: or operation */
 
+#define WFX_RESET_INVERTED 1
+
 static const struct wfx_platform_data wfx_spi_pdata = {
 	.file_fw = "wfm_wf200",
 	.file_pds = "wf200.pds",
@@ -154,6 +156,11 @@ static void wfx_spi_request_rx(struct work_struct *work)
 	wfx_bh_request_rx(bus->core);
 }
 
+static void wfx_flush_irq_work(void *w)
+{
+	flush_work(w);
+}
+
 static size_t wfx_spi_align_size(void *priv, size_t size)
 {
 	// Most of SPI controllers avoid DMA if buffer size is not 32bit aligned
@@ -201,28 +208,31 @@ static int wfx_spi_probe(struct spi_device *func)
 	if (!bus->gpio_reset) {
 		dev_warn(&func->dev, "try to load firmware anyway\n");
 	} else {
-		gpiod_set_value(bus->gpio_reset, 0);
-		udelay(100);
+		if (spi_get_device_id(func)->driver_data & WFX_RESET_INVERTED)
+			gpiod_toggle_active_low(bus->gpio_reset);
 		gpiod_set_value(bus->gpio_reset, 1);
+		udelay(100);
+		gpiod_set_value(bus->gpio_reset, 0);
 		udelay(2000);
 	}
 
-	ret = devm_request_irq(&func->dev, func->irq, wfx_spi_irq_handler,
-			       IRQF_TRIGGER_RISING, "wfx", bus);
-	if (ret)
-		return ret;
-
 	INIT_WORK(&bus->request_rx, wfx_spi_request_rx);
 	bus->core = wfx_init_common(&func->dev, &wfx_spi_pdata,
 				    &wfx_spi_hwbus_ops, bus);
 	if (!bus->core)
 		return -EIO;
 
-	ret = wfx_probe(bus->core);
+	ret = devm_add_action_or_reset(&func->dev, wfx_flush_irq_work,
+				       &bus->request_rx);
 	if (ret)
-		wfx_free_common(bus->core);
+		return ret;
 
-	return ret;
+	ret = devm_request_irq(&func->dev, func->irq, wfx_spi_irq_handler,
+			       IRQF_TRIGGER_RISING, "wfx", bus);
+	if (ret)
+		return ret;
+
+	return wfx_probe(bus->core);
 }
 
 static int wfx_spi_remove(struct spi_device *func)
@@ -230,11 +240,6 @@ static int wfx_spi_remove(struct spi_device *func)
 	struct wfx_spi_priv *bus = spi_get_drvdata(func);
 
 	wfx_release(bus->core);
-	wfx_free_common(bus->core);
-	// A few IRQ will be sent during device release. Hopefully, no IRQ
-	// should happen after wdev/wvif are released.
-	devm_free_irq(&func->dev, func->irq, bus);
-	flush_work(&bus->request_rx);
 	return 0;
 }
 
@@ -244,14 +249,16 @@ static int wfx_spi_remove(struct spi_device *func)
  * stripped.
  */
 static const struct spi_device_id wfx_spi_id[] = {
-	{ "wfx-spi", 0 },
+	{ "wfx-spi", WFX_RESET_INVERTED },
+	{ "wf200", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(spi, wfx_spi_id);
 
 #ifdef CONFIG_OF
 static const struct of_device_id wfx_spi_of_match[] = {
-	{ .compatible = "silabs,wfx-spi" },
+	{ .compatible = "silabs,wfx-spi", .data = (void *)WFX_RESET_INVERTED },
+	{ .compatible = "silabs,wf200" },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, wfx_spi_of_match);
diff --git a/drivers/staging/wfx/main.c b/drivers/staging/wfx/main.c
index 84adad64fc30..76b2ff7fc7fe 100644
--- a/drivers/staging/wfx/main.c
+++ b/drivers/staging/wfx/main.c
@@ -262,6 +262,16 @@ static int wfx_send_pdata_pds(struct wfx_dev *wdev)
 	return ret;
 }
 
+static void wfx_free_common(void *data)
+{
+	struct wfx_dev *wdev = data;
+
+	mutex_destroy(&wdev->rx_stats_lock);
+	mutex_destroy(&wdev->conf_mutex);
+	wfx_tx_queues_deinit(wdev);
+	ieee80211_free_hw(wdev->hw);
+}
+
 struct wfx_dev *wfx_init_common(struct device *dev,
 				const struct wfx_platform_data *pdata,
 				const struct hwbus_ops *hwbus_ops,
@@ -332,15 +342,10 @@ struct wfx_dev *wfx_init_common(struct device *dev,
 	wfx_init_hif_cmd(&wdev->hif_cmd);
 	wfx_tx_queues_init(wdev);
 
-	return wdev;
-}
+	if (devm_add_action_or_reset(dev, wfx_free_common, wdev))
+		return NULL;
 
-void wfx_free_common(struct wfx_dev *wdev)
-{
-	mutex_destroy(&wdev->rx_stats_lock);
-	mutex_destroy(&wdev->conf_mutex);
-	wfx_tx_queues_deinit(wdev);
-	ieee80211_free_hw(wdev->hw);
+	return wdev;
 }
 
 int wfx_probe(struct wfx_dev *wdev)
diff --git a/drivers/staging/wfx/main.h b/drivers/staging/wfx/main.h
index 875f8c227803..9c9410072def 100644
--- a/drivers/staging/wfx/main.h
+++ b/drivers/staging/wfx/main.h
@@ -34,7 +34,6 @@ struct wfx_dev *wfx_init_common(struct device *dev,
 				const struct wfx_platform_data *pdata,
 				const struct hwbus_ops *hwbus_ops,
 				void *hwbus_priv);
-void wfx_free_common(struct wfx_dev *wdev);
 
 int wfx_probe(struct wfx_dev *wdev);
 void wfx_release(struct wfx_dev *wdev);
diff --git a/drivers/staging/wfx/queue.c b/drivers/staging/wfx/queue.c
index 0bcc61feee1d..51d6c55ae91f 100644
--- a/drivers/staging/wfx/queue.c
+++ b/drivers/staging/wfx/queue.c
@@ -130,12 +130,12 @@ static void wfx_tx_queue_clear(struct wfx_dev *wdev, struct wfx_queue *queue,
 	spin_lock_bh(&queue->queue.lock);
 	while ((item = __skb_dequeue(&queue->queue)) != NULL)
 		skb_queue_head(gc_list, item);
-	spin_lock_bh(&stats->pending.lock);
+	spin_lock_nested(&stats->pending.lock, 1);
 	for (i = 0; i < ARRAY_SIZE(stats->link_map_cache); ++i) {
 		stats->link_map_cache[i] -= queue->link_map_cache[i];
 		queue->link_map_cache[i] = 0;
 	}
-	spin_unlock_bh(&stats->pending.lock);
+	spin_unlock(&stats->pending.lock);
 	spin_unlock_bh(&queue->queue.lock);
 }
 
@@ -207,9 +207,9 @@ void wfx_tx_queue_put(struct wfx_dev *wdev, struct wfx_queue *queue,
 
 	++queue->link_map_cache[tx_priv->link_id];
 
-	spin_lock_bh(&stats->pending.lock);
+	spin_lock_nested(&stats->pending.lock, 1);
 	++stats->link_map_cache[tx_priv->link_id];
-	spin_unlock_bh(&stats->pending.lock);
+	spin_unlock(&stats->pending.lock);
 	spin_unlock_bh(&queue->queue.lock);
 }
 
@@ -237,11 +237,11 @@ static struct sk_buff *wfx_tx_queue_get(struct wfx_dev *wdev,
 		__skb_unlink(skb, &queue->queue);
 		--queue->link_map_cache[tx_priv->link_id];
 
-		spin_lock_bh(&stats->pending.lock);
+		spin_lock_nested(&stats->pending.lock, 1);
 		__skb_queue_tail(&stats->pending, skb);
 		if (!--stats->link_map_cache[tx_priv->link_id])
 			wakeup_stats = true;
-		spin_unlock_bh(&stats->pending.lock);
+		spin_unlock(&stats->pending.lock);
 	}
 	spin_unlock_bh(&queue->queue.lock);
 	if (wakeup_stats)
@@ -259,10 +259,10 @@ int wfx_pending_requeue(struct wfx_dev *wdev, struct sk_buff *skb)
 	spin_lock_bh(&queue->queue.lock);
 	++queue->link_map_cache[tx_priv->link_id];
 
-	spin_lock_bh(&stats->pending.lock);
+	spin_lock_nested(&stats->pending.lock, 1);
 	++stats->link_map_cache[tx_priv->link_id];
 	__skb_unlink(skb, &stats->pending);
-	spin_unlock_bh(&stats->pending.lock);
+	spin_unlock(&stats->pending.lock);
 	__skb_queue_tail(&queue->queue, skb);
 	spin_unlock_bh(&queue->queue.lock);
 	return 0;
diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c
index b71756ab0394..7fe64fcd385d 100644
--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -3372,6 +3372,8 @@ static void hfa384x_int_rxmonitor(struct wlandevice *wlandev,
 	     WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + WLAN_CRC_LEN)) {
 		pr_debug("overlen frm: len=%zd\n",
 			 skblen - sizeof(struct p80211_caphdr));
+
+		return;
 	}
 
 	skb = dev_alloc_skb(skblen);
diff --git a/drivers/staging/wlan-ng/prism2usb.c b/drivers/staging/wlan-ng/prism2usb.c
index 352556f6870a..4689b2170e4f 100644
--- a/drivers/staging/wlan-ng/prism2usb.c
+++ b/drivers/staging/wlan-ng/prism2usb.c
@@ -180,6 +180,7 @@ static void prism2sta_disconnect_usb(struct usb_interface *interface)
 
 		cancel_work_sync(&hw->link_bh);
 		cancel_work_sync(&hw->commsqual_bh);
+		cancel_work_sync(&hw->usb_work);
 
 		/* Now we complete any outstanding commands
 		 * and tell everyone who is waiting for their
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 47f09a6ce7bd..84d6f7df09a4 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -923,16 +923,16 @@ static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss)
 
 	mutex_lock(&acm->port.mutex);
 
-	if ((ss->close_delay != old_close_delay) ||
-            (ss->closing_wait != old_closing_wait)) {
-		if (!capable(CAP_SYS_ADMIN))
+	if (!capable(CAP_SYS_ADMIN)) {
+		if ((ss->close_delay != old_close_delay) ||
+		    (ss->closing_wait != old_closing_wait))
 			retval = -EPERM;
-		else {
-			acm->port.close_delay  = close_delay;
-			acm->port.closing_wait = closing_wait;
-		}
-	} else
-		retval = -EOPNOTSUPP;
+		else
+			retval = -EOPNOTSUPP;
+	} else {
+		acm->port.close_delay  = close_delay;
+		acm->port.closing_wait = closing_wait;
+	}
 
 	mutex_unlock(&acm->port.mutex);
 	return retval;
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 886c9b602f8c..5267ad2989ee 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1436,10 +1436,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 	 * We need to map sg if the transfer_buffer is
 	 * NULL.
 	 */
-	if (!urb->transfer_buffer)
-		qh->use_sg = true;
-
-	if (qh->use_sg) {
+	if (!urb->transfer_buffer) {
 		/* sg_miter_start is already done in musb_ep_program */
 		if (!sg_miter_next(&qh->sg_miter)) {
 			dev_err(musb->controller, "error: sg list empty\n");
@@ -1447,9 +1444,8 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 			status = -EINVAL;
 			goto done;
 		}
-		urb->transfer_buffer = qh->sg_miter.addr;
 		length = min_t(u32, length, qh->sg_miter.length);
-		musb_write_fifo(hw_ep, length, urb->transfer_buffer);
+		musb_write_fifo(hw_ep, length, qh->sg_miter.addr);
 		qh->sg_miter.consumed = length;
 		sg_miter_stop(&qh->sg_miter);
 	} else {
@@ -1458,11 +1454,6 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 
 	qh->segsize = length;
 
-	if (qh->use_sg) {
-		if (offset + length >= urb->transfer_buffer_length)
-			qh->use_sg = false;
-	}
-
 	musb_ep_select(mbase, epnum);
 	musb_writew(epio, MUSB_TXCSR,
 			MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
@@ -1977,8 +1968,10 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 	urb->actual_length += xfer_len;
 	qh->offset += xfer_len;
 	if (done) {
-		if (qh->use_sg)
+		if (qh->use_sg) {
 			qh->use_sg = false;
+			urb->transfer_buffer = NULL;
+		}
 
 		if (urb->status == -EINPROGRESS)
 			urb->status = status;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 5737add6a2a4..4cca0b836f43 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -710,7 +710,7 @@ static void edge_interrupt_callback(struct urb *urb)
 		/* grab the txcredits for the ports if available */
 		position = 2;
 		portNumber = 0;
-		while ((position < length) &&
+		while ((position < length - 1) &&
 				(portNumber < edge_serial->serial->num_ports)) {
 			txCredits = data[position] | (data[position+1] << 8);
 			if (txCredits) {
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 0b5dcf973d94..8bfffca3e4ae 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1992,8 +1992,14 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) },	/* D-Link DWM-152/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) },	/* D-Link DWM-156/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) },	/* D-Link DWM-156/A3 */
+	{ USB_DEVICE_INTERFACE_CLASS(0x1435, 0xd191, 0xff),			/* Wistron Neweb D19Q1 */
+	  .driver_info = RSVD(1) | RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1690, 0x7588, 0xff),			/* ASKEY WWHC050 */
+	  .driver_info = RSVD(1) | RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff),			/* Olicard 600 */
 	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2033, 0xff),			/* BroadMobi BM806U */
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2060, 0xff),			/* BroadMobi BM818 */
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) },			/* OLICARD300 - MT6225 */
diff --git a/fs/libfs.c b/fs/libfs.c
index c686bd9caac6..3759fbacf522 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -891,7 +891,7 @@ int simple_attr_open(struct inode *inode, struct file *file,
 {
 	struct simple_attr *attr;
 
-	attr = kmalloc(sizeof(*attr), GFP_KERNEL);
+	attr = kzalloc(sizeof(*attr), GFP_KERNEL);
 	if (!attr)
 		return -ENOMEM;
 
@@ -931,9 +931,11 @@ ssize_t simple_attr_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 
-	if (*ppos) {		/* continued read */
+	if (*ppos && attr->get_buf[0]) {
+		/* continued read */
 		size = strlen(attr->get_buf);
-	} else {		/* first read */
+	} else {
+		/* first read */
 		u64 val;
 		ret = attr->get(attr->data, &val);
 		if (ret)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 1cc945daa9c8..5080469094af 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -1034,17 +1034,6 @@ static void __reg_bound_offset(struct bpf_reg_state *reg)
 						 reg->umax_value));
 }
 
-static void __reg_bound_offset32(struct bpf_reg_state *reg)
-{
-	u64 mask = 0xffffFFFF;
-	struct tnum range = tnum_range(reg->umin_value & mask,
-				       reg->umax_value & mask);
-	struct tnum lo32 = tnum_cast(reg->var_off, 4);
-	struct tnum hi32 = tnum_lshift(tnum_rshift(reg->var_off, 32), 32);
-
-	reg->var_off = tnum_or(hi32, tnum_intersect(lo32, range));
-}
-
 /* Reset the min/max bounds of a register */
 static void __mark_reg_unbounded(struct bpf_reg_state *reg)
 {
@@ -5717,10 +5706,6 @@ static void reg_set_min_max(struct bpf_reg_state *true_reg,
 	/* We might have learned some bits from the bounds. */
 	__reg_bound_offset(false_reg);
 	__reg_bound_offset(true_reg);
-	if (is_jmp32) {
-		__reg_bound_offset32(false_reg);
-		__reg_bound_offset32(true_reg);
-	}
 	/* Intersecting with the old var_off might have improved our bounds
 	 * slightly.  e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc),
 	 * then new var_off is (0; 0x7f...fc) which improves our umax.
@@ -5830,10 +5815,6 @@ static void reg_set_min_max_inv(struct bpf_reg_state *true_reg,
 	/* We might have learned some bits from the bounds. */
 	__reg_bound_offset(false_reg);
 	__reg_bound_offset(true_reg);
-	if (is_jmp32) {
-		__reg_bound_offset32(false_reg);
-		__reg_bound_offset32(true_reg);
-	}
 	/* Intersecting with the old var_off might have improved our bounds
 	 * slightly.  e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc),
 	 * then new var_off is (0; 0x7f...fc) which improves our umax.
